Stainless & Duplex Steel Round Bars

Specifications :
Stainless Steel 202, 304,310, 304L, 316, 316L, 316TI, 317, 317L, 321, 904L
Standards ASTM / ASME SA 790
Grades UNS NO. S 31803, S 32205, S 32550, S 32750, S 32760

Carbon & Alloy Steel Round Bars

RANGE : 1 MM TO 350 MM DIA
Carbon Steel : ASTM / ASME A 105
Alloy Steel : ASTM / ASME A 182 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91. ASTM / ASME A 729 GR B 11 & B 22.

Nickel & Copper Alloy Round Bars

RANGE: 3.17 MM TO 350 MM DIA
Nickel Alloy ASTM / ASME SB 160 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 )
ASTM / ASME SB 164 UNS 4400 (MONEL 400 )
ASTM / ASME SB 425 UNS 8825 (INCONEL 825) ASTM / ASME SB 166 UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 )
ASTM / ASME SB 446UNS 6625 (INCONEL 625)
ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 )
ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )

Hastelloy Round Bars

We offer the hastelloy rods as per the following grades:- Grades as under:- Hastelloy C-4 (UNS No. N06455), C-276 (UNS No. N10276), Hastelloy C 22 (UNS No. N06022), Hastelloy C 2000
Available In Different

  • Grades
  • Sizes
  • Designs
  • Finishes

  • Sizes Available
    • 6mm
    • 8mm
    • 10mm
    • 12mm
    • 13mm
    • 16mm
    • 19mm
    • 22mm
    • 28mm
    • 40mm
    • 60mm
    • 75mm
    • 90mm
    • 120mm
    Size Available:1 mm dia to 200 mm dia

    Inconel

    Inconel Round Bars

    Inconel rods have an excellent mechanical properties and provide good resistance to oxidation. These pipes find extensive application in furnace muffles, electronic components, heat treating equipment, steam generator tubing, heat exchangers, etc.

    Inconel Rods/Bar

    • Inconel K600 Bar – UNS N06600
    • Inconel 601 Bar – UNS N06601
    • Inconel 625 Bar – UNS N06625
    • Inconel 800 Bar – UNS N08800
    • Inconel 800H Bar – UNS N08810
    • Inconel 825 Bar – UNS N08825
    Size Available:1 mm dia to 200 mm dia

    Inconel

    Incoloy Round Bars

    Grades : Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DS
    STANDARD : BASTM B408, AMS 5766, ISO 9723, ISO 9724, BS 3076NA15, BS 3075NA15, EN 10095, VdTüV 412 & 434
    Type :
    Round Bar
    Bright Bar
    Polish Bar
    Black Round Bar
    Forged Bar
    Forged Round Bar
    Hex Bar
    Forged Hex Bar
    Flat Bar
    Rod
    Monel

    Inconel

    Monel Round Bars

    Our striking range of monel rod /bars is available in different forms and sizes. All our products are offered as per the international standards. With the assistance of our experts and professionals.

    Range: 100 mm dia to 500 mm dia in 100 mm to 6000 mm length
    Grades as under :monel 400 (uns no. N04400), monel 500 (uns no. N05500)
    Size Available: 1 mm dia to 200 mm dia

    Inconel

    Nironics 50 Round Bars

    Featuers
    Nitronic 50 Stainless Steel is an austenitic stainless steel with a blend of strength and corrosion resistance that is better than Stainless Steel 316, 316L, 317 and 317L. In fact, Nitronic 50 has about double the yield strength at room temperature compared to Stainless Steel 316/316L and 317/317L. Additionally, Nitronic 50 Stainless Steel has good mechanical properties at elevated and sub-zero s.
    temperatures. Another characteristic of Nitronic 50 is that it does not become magnetic even when severely cold worked - unlike many other austenitic stainless steels. Another advantage of using Nitronic 50 Stainless Steel is its outstanding corrosion resistance in harsh environments, especially in marine application As noted previously, Nitronic 50 is much stronger than Stainless Steel 316/316L and 317/317L; however, the same fabrication equipment and procedures used for the Stainless Steel 300 grades can be utilized for Nitronic 50. In addition, the same cooling techniques used for Stainless Steel 316/316L and 317/317L can be utilized for Nitronic 50.
    Grades Available:
    • XM-19 (UNS S20910)
    • Nitronic 50 Annealed
    • XM-19HS

    Inconel

    Nitronic 60 round bar

    Nitronic 60 Stainless Steel is an austenitic alloy, considered to have the best galling resistance of the entire range of Stainless Steels.
    Characteristics of Nitronic 60 include
    • High pitting resistance
    • Outstanding corrosion resistance • Good high temperature properties for temperatures around 982 degrees Centigrade
    • Oxidation resistance
    • Crevice corrosion and chloride pitting resistance is greater than Stainless Steel 316.
    Nitronic 60 can be formed using common forming techniques, and pre-heating is not required to weld Nitronic 60.
    Common welding methods such as gas metal arc, gas tungsten arc and submerged arc can be used to weld Nitronic 60. Hardening Nitronic 60 Stainless Steel calls for the alloy to be cold worked.
    Primary Elements:
    • Between 16 and 18 percent Chromium
    • 8 to 9 percent Nickel
    • 7 to 9 percent Manganese
    • 3.5 to 4.5 percent Silicon
    • Halance being Iron
    • Trace amounts of Carbon, Sulfur, Phosphorus and Nitrogen
    Industries Served :
    • Oil and gas production
    • Hydroelectric power
    • Petrochemical
    • Food processing
    • Automotive
    • Zarine
    • Nharmaceutical
    • Construction and chemical sector.

    Inconel

    Titanium Round Bars

    We are engaged in exporting, importing, and supplying Titanium Rods. The wide range of Titanium Rods provided by us possess high quality, great finish, rust-free nature, and long service life. We provide the Titanium Rods to the clients in various grades and different other specifications. The Titanium Rods which we bring forth are duly tested over various parameters to ensure their flawless nature. .
    Known For
    • High quality
    • Great finish
    • Rust-free nature
    • Long service life
    Size Available: 1 mm dia to 200 mm dia

    Inconel

    Tantalum Round Bars

    Specifications : Tantalum bar
    Material: Ta
    Grade: RO5200, RO5400, RO5252(Ta-2.5W), RO5255(Ta-10W)
    size: Dia3~120mm
    Standard:ASTM B 365
    Tantalum products/Tantalum bars Material: Ta-1
    Grade: RO5200, RO5400, RO5252(Ta-2.5W), RO5255(Ta-10W)
    size: Dia3~120mm
    Standard:ASTM B 365
    Tantalum bar Tantalum- tungsten alloy bar
    Material: RO5200, RO5400, RO5252(Ta-2.5W), RO5255(Ta-10W)
    Available size: 3~120mm
    Standard: As per ASTM B 365-98
    Purity: >=99.95% or 99.99% Tantalum rod Tantalum alloy rod
    Standard,ASTM B365-98
    Dimension,Dia3~100mm
    Material,RO5200,RO5400,RO5252(Ta-2.5W)

    Tolerance
    Diameter Diameter Tolerance Length Tolerance
    forging rod Extruded Rods rolling rod ground rod
    3.0-4.5 ±0.05   ±0.05   500-1500 + 5
    4.5-6.5 ±0.10   ±0.10   500-1500 + 5
    6.5-10.0 ±0.15   ±0.15   400-1500 + 5
    10-16 ±0.20   ±0.20   300-1200 + 5
    16-18 ±1.0     ±0.30 200-2000 + 20
    18-25 ±1.5 ±1.0   ±0.40 200-2000 + 20
    25-40 ±2.0 ±1.5   ±0.50 150-4000 + 20
    40-50 ±2.5 ±2.0   ±0.60 100-3000 + 20
    50-65 ±3.0 ±2.0   ±0.80 100-1500 + 20